Characteristic ：
1. Millimeter-wave radar, with a measurement accuracy of up to ±1mm, and a minimum
blind area of 0.1m.
2. The smaller antenna size satisfies the measurement of more working conditions.
3. A variety of lens antennas, smaller launch angle, more concentrated energy, stronger
echo signal, under the same industrial and mining conditions, compared to
Other radar products have higher reliability.
4. With stronger penetrability, it can be used normally even if there is adhesion and
condensation.
5. The dynamic signal range is larger, and the measurement of low dielectric constant
medium is more stable.
6. A variety of measurement modes, the radar reaction time in the fast measurement
mode is less than 1S.

HYRD11S Radar Level Transmitter
Measuring medium: Liquid

product-210-377

Measuring range: 0.1m~10m
Process connection: Thread G¾"A / ¾"NPT
Flange ≥DN25
Process temperature: -40～100℃
Process pressure: -0.1～1.6 MPa
Antenna size:21mm lens antenna
Antenna material: PTFE
Accuracy: ±2mm
Protection level: IP67
Center frequency: 80GHz
Launch angle:14°
Power source: Two-wire system/DC24V
Four-wire system/AC220V
Six-wire system/DC12-24V
Shell: Aluminum/Plastic/Stainless steel
Signal output: Two-wire system/4...20mA/HART protocol
Four-wire system/4...20mA/HART protocol
Six-wire system/4...20mA/HART protocol

Product Size (unit: mm)

product-572-330

Model Selection:

License

P Standard (Non-explosion-proof)

I Intrinsically safe（Exia IIC T6 Ga）

D Flameproof（Ex db IIC T6 Gb）

Process Connection / Material

1 G3.5A Thread

2 Flange≥DN80 (Stainless steel + PTFE)

X Special customization

Flange option / material

Specification / Code / Material	PP	PTFE	Stainless steel304+PTFE	Stainless steel316L+PTFE
DN80	G4	S4	GF4	SF4
DN100	G5	S5	GF5	SF5
DN125	G6	S6	GF6	SF6
DN150	G7	S7	GF7	SF7
DN200	G8	S8	GF8	SF8