Features
In-line gage and absolute pressure measurements support up to 20,000 psi (1378,95 bar) for pressure or level solutions
Application specific configuration allows you to transform your pressure transmitter into a level transmitter with volume calculations
Complete pressure or level assemblies are leak-tested and calibrated to reduce leak points up to 70% and simplify installation
10-year installed stability and 150:1 rangedown produce reliable measurements and wide application flexibility
Bluetooth® wireless connectivity unlocks a far simpler process to perform maintenance and service tasks without the need for a physical connection or separate configuration tool
The graphical, back-lit display allows for easy operation in 8 different languages in all lighting conditions
Loop Integrity and Plugged Impulse Line diagnostics detect electrical loop issues and plugged impulse piping before it impacts the quality of the process for increased safety and reduced downtime
Quick service buttons offer built-in configuration buttons for streamlined commissioning
SIL 2/3 certified to IEC 61508 (via 3rd party) and prior-use certificate of FMEDA data for safety installations
Wireless Features
WirelessHART® technology is secure and cost-effective and delivers >99% data reliability
SmartPower™ module provides up to 10-year maintenance-free operation and field replacement without transmitter removal
Easy installation enables quick instrumentation of measurement points without the cost of wiring
Specifications
- Warranty Up to 5-year limited warranty
- Rangedown Up to 150:1
- Communication Protocol 4-20 MA HART®, WirelessHART®, FOUNDATION™ fieldbus, PROFIBUS® PA, 1-5 V Low Power HART®
- Measurement Range Up to 20000 psig (1378,95 bar) gage
Up to 20000 psia (1378,95 bar) absolute
- Process Wetted Material 316L SST, Alloy C-276, Alloy 400, Tantalum, Gold-plated 316L SST, Gold-plated Alloy 400
- Diagnostics Basic Diagnostics, Process Alerts, Loop Integrity Diagnostics, Plugged Impulse Line Diagnostics
- Certifications/Approvals SIL 2/3 certified to IEC 61508 by an independent 3rd party, NSF, NACE®, hazardous location, see full specs for complete list of certifications
- Wireless Update Rate 1 sec. to 60 min., user selectable
- Power Module Life Up to 10-year life, field replaceable (order separately)
- Wireless Range Internal antenna (225 m)
- Order Code:
-
Code
Description
3051T
In-Line Pressure Transmitter
-
Pressure type
Code
Description
G
Gage
★
A(1)
Absolute
★
-
Pressure range
Code
Gage (Rosemount 3051TG)(1)
Absolute (Rosemount 3051TA)
0
–5 to 5 psi (-344.74 to 344.74 mbar)
N/A
★
1
–14.7 to 30 psi (-1.01 to 2.06 bar)
0 to 30 psia (0 to 2.06 bar)
★
2
–14.7 to 150 psi (-1.01 to 10.34 bar)
0 to 150 psia (0 to 10.34 bar)
★
3
–14.7 to 800 psi (-1.01 to 55.15 bar)
0 to 800 psia (0 to 55.15 bar)
★
4
–14.7 to 4000 psi (-1.01 to 275.79 bar)
0 to 4000 psia (0 to 275.79 bar)
★
5
–14.7 to 10000 psi (-1.01 to 689.47 bar)
0 to 10000 psia (0 to 689.47 bar)
★
6(2)
–14.7 to 20000 psi (–1.01 to 1378.95 bar)
0 to 20000 psia (0 to 1378.95 bar)
-
Transmitter output
Code
Description
A(1)
4–20 mA with digital signal based on HART® Protocol
★
F
FOUNDATION™ Fieldbus Protocol
★
W(2)
PROFIBUS® PA Protocol
★
X(3)
Wireless (requires wireless options and engineered polymer housing)
★
M(4)
Low-power, 1–5 Vdc with digital signal based on HART Protocol
-
Process connection style
Code
Description
2B
½-14 NPT female (range 1-5 only)
★
2C(1)
G½ A EN837-1 male (range 1-4 only)
★
2F(2)
Coned and threaded, compatible with autoclave Type F-250-C (range 5-6 only)
61(3)(4)
Non-threaded instrument flange (range 1-4 only)
-
Isolating diaphragm
Materials of Construction comply with recommendations per NACE MR0175/ISO 15156 for sour oil field production environments. Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining environments.
Code
Isolating diaphragm
Process connection wetted parts material
2
316L stainless steel
316L stainless steel
★
3
Alloy C-276
Alloy C-276
★
7
Gold-plated 316 stainless steel
316L stainless steel
Sensor fill fluid
Code
Description
1
Silicone
★
2(1)
Inert
(1) Not available with wireless output.
Housing material
Code
Housing material
Conduit entry size
A
Aluminum
½-14 NPT
★
B
Aluminum
M20 x 1.5
★
E
Aluminum, ultra low copper
½-14 NPT
F
Aluminum, ultra low copper
M20 x 1.5
J
Stainless steel
½-14 NPT
★
K
Stainless steel
M20 x 1.5
P(1)
Engineered polymer
No conduit entries
★
D(2)
Aluminum
G½
M(2)
Stainless steel
G½
-
Wireless options
Requires wireless output code X and engineered polymer housing code P.
Wireless transmit rate, operating frequency, and protocol
Code
Description
WA3
User configurable transmit rate, 2.4 GHz WirelessHART®
★
Antenna and SmartPower
Code
Description
WP5
Internal antenna, compatible with Green Power Module (I.S. Power Module sold separately).
★
Additional options
Extended product warranty
Code
Description
WR3
3-year limited warranty
★
WR5
5-year limited warranty
★
Plantweb™ control functionality
Code
Description
A01
FOUNDATION™ Fieldbus control function block suite
★
Plantweb™ diagnostic functionality
Code
Description
DA0
Loop Integrity HART® Diagnostic
★
D01
FOUNDATION™ Fieldbus Diagnostics Suite
★
Integral assembly
"Assemble-to" items are specified separately and require a completed model number.
Code
Description
S5
Assemble to Rosemount 306 Integral Manifold
★
Diaphragm seal assemblies
"Assemble-to" items are specified separately and require a completed model number.
Code
Description
S1
Assemble to one Rosemount 1199 seal
★
Mounting bracket
Panel mounting bolts are not supplied.
Code
Description
B4
Bracket for 2-in. pipe or panel mounting, all stainless steel
★
Product certifications
Code
Description
E8
ATEX Flameproof and Dust Certification
★
I1(1)
ATEX Intrinsic Safety and Dust
★
IA
ATEX FISCO Intrinsic Safety; for FOUNDATION™ Fieldbus or PROFIBUS® PA Protocol only
★
N1
ATEX Type n Certification and Dust
★
K8
ATEX Flameproof, Intrinsic Safety, Type n, Dust (combination of E8, I1 and N1)
★
E4
TIIS Flame-proof
★
I4
TIIS Intrinsic Safety
★
E5
USA Explosion-proof, Dust Ignition-Proof
★
I5(2)
USA Intrinsically Safe, Nonincendive
★
C6
Canada Explosion-proof, Dust Ignition-proof, Intrinsically Safe, and Division 2
★
E6
Canada Explosion-proof, Dust Ignition-proof, Division 2
★
I6
Canada Intrinsic Safety
★
K6
Canada and ATEX Explosion-proof, Intrinsically Safe, and Division 2 (combination of C6, E8, and I1)
★
E7
IECEx Flameproof, Dust Ignition-proof
★
I7
IECEx Intrinsic Safety
★
N7
IECEx Type n Certification
★
K7
IECEx Flame-proof, Dust Ignition-proof, Intrinsic Safety, and Type n (combination of I7, N7, and E7)
★
IG
IECEx FISCO Intrinsically Safe; for FOUNDATION Fieldbus or PROFIBUS PA Protocols only
★
K5
USA Explosion-proof, Dust Ignition-Proof, Intrinsically Safe, and Division 2
★
E2
INMETRO Flameproof001
★
I2
INMETRO Intrinsic Safety
★
IB
INMETRO FISCO intrinsically safe; for FOUNDATION Fieldbus or PROFIBUS PA Protocols only
★
K2
INMETRO Flameproof, Intrinsic Safety
★
E3
China Flameproof
★
I3
China Intrinsic Safety
★
N3
China Type n
★
EM
Technical Regulations Customs Union (EAC) Flameproof
★
IM
Technical Regulations Customs Union (EAC) Intrinsic Safety
★
KM
Technical Regulations Customs Union (EAC) Flameproof and Intrinsic Safety
★
KB
USA and Canada Explosion-proof, Dust Ignition Proof, Intrinsically Safe, and Division 2 (combination of K5 and C6)
★
KD
USA, Canada, and ATEX Explosion-proof, Intrinsically Safe (combination of K5, C6, I1, and E8)
★
KL(3)
USA, Canada, IECEx, ATEX Intrinsic Safety Combination
★
KS
USA, Canada, IECEx, ATEX Explosion Proof, Intrinsically Safe, Dust, Non-Incendive, Type-N, Div. 2
★
EP
Republic of Korea Flameproof
★
IP
Republic of Korea Intrinsic Safety
★
KP
Republic of Korea Flameproof, Intrinsic Safety
★
Dust approval not applicable to output code X.
Nonincendive certification not provided with output code (X).
Only available with output code X.
Drinking water approval
Not available with alloy isolator (option code 3), assemble-to manifolds (option code S5), assemble-to seals (option code S1), surface finish certification (option code Q16), and remote seal system report (option code QZ).
Code
Description
DW
NSF drinking water approval
★
Shipboard approvals
Shipyard approvals are not available with wireless output (code X).
Code
Description
SBS
American Bureau of Shipping
★
SBV(1)
Bureau Veritas (BV)
★
SDN
Det Norske Veritas
★
SLL(1)
Lloyds Register (LR)
★
(1) Only available with product certifications E7, E8, I1, I7, IA, K7, K8, KD, N1, N7
SST tagging
Code
Description
Y2
316 SST nameplate, top tag, wire-on tag, and fasteners
Custody transfer
The custody transfer option is only available with HART 4–20 mA output (code A).
Code
Description
C5
Measurement Canada Accuracy Approval (limited availability depending on transmitter type and range; contact an Emerson representative).
★
Calibration certification
Code
Description
Q4
Calibration certificate
★
QG
Calibration certificate and GOST verification certificate
★
QP
Calibration certificate and tamper evident seal
★
Material traceability certification
Code
Description
Q8
Material traceability certification per EN 10204 3.1.B
★
Positive material identification (PMI)
Code
Description
Q76
PMI verification and certificate
★
Quality certification for safety
The quality certification for safety is only available with HART® 4–20 mA output (code A).
Code
Description
QT
Safety certified to IEC 61508 with certificate of FMEDA
★
Configuration buttons
Code
Description
D4(1)
Analog zero and span
★
DZ(2)
Digital zero trim
★
Only available with HART 4–20 mA output (code A).
Only available with HART 4–20 mA output (output code A) and wireless output (output code X).
Display and interface options
Code
Description
M4(1)
LCD display with LOI
★
M5
LCD display
★
(1) Only available with 4-20 mA HART output (code A) and PROFIBUS-PA (code W).
Wireless sensor module
Code
Description
WSM
Wireless stainless steel sensor module
★
Transient protection
The transient protection option is not available with wireless output (code X). The T1 option is not needed with FISCO Product Certifications; transient protection is included in the FISCO product certification codes IA, IB, and IE.
Code
Description
T1
Transient protection terminal block
★
Conduit plug
The conduit plug option is not available with wireless output (code X).
Code
Description
DO
316 SST conduit plug
★
Software configuration
Code
Description
C1
Custom software configuration. (Completed Rosemount 3051 Wireless Configuration Data Sheet required with order.)
★
Low power output
Code
Description
C2
0.8–3.2 Vdc output with digital signal based on HART Protocol (available with output code M only)
★
Alarm levels
The alarm levels option is only available with HART 4–20 mA output (code A).
Code
Description
C4(1)
Analog output levels compliant with NAMUR recommendation NE 43, alarm high
★
CN(1)
Analog output levels compliant with NAMUR recommendation NE 43, alarm low
★
CR
Custom alarm and saturation signal levels, high alarm (requires C1 and Rosemount 3051 Configuration Data Sheet)
★
CS
Custom alarm and saturation signal levels, low alarm (requires C1 and Rosemount 3051 Configuration Data Sheet)
★
CT
Rosemount standard low alarm
★
(1) NAMUR-compliant operation is preset at the factory and can be changed to standard operation in the field for the standard Rosemount 3051.
Pressure testing
Code
Description
P1(1)
Hydrostatic testing with certificate
★
(1) Not available with pressure range 0.
Cleaning process area
Not valid with alternate process connection S5.
Code
Description
P2
Cleaning for special service
P3
Cleaning for < 1 ppm chlorine/fluoride
Ground screw
The ground screw option is not available with wireless output (code X). The V5 option is not needed with the T1 option; external ground screw assembly is included with the T1 option.
Code
Description
V5
External ground screw assembly
★
High accuracy
Only available with standard Rosemount 3051. See Specifications section for more information.
Code
Description
P8
0.04% accuracy to 5:1 turndown (range 2-4)
★
Surface finish
Code
Description
Q16
Surface finish certification for sanitary remote seals
★
Toolkit total system performance reports
Code
Description
QZ
Remote seal system performance calculation report
★
Conduit electrical connector
The conduit electrical connector option is not available with wireless output (code X).
Code
Description
GE
M12, 4-pin, male connector (eurofast®)
★
GM
A size mini, 4-pin, male connector (minifast®)
★
NACE certificate
Note that NACE®-compliant wetted materials are required. Materials of construction must comply with recommendations per NACE MR0175/ISO 15156 for sour oil field production environments. Environmental limits apply to certain materials. Consult the latest standard for details. All selected materials must also conform to NACE MR0103 for sour refining environments.
Code
Description
Q15
Certificate of Compliance to NACE MR0175/ISO 15156 for wetted materials
★
Q25
Certificate of Compliance to NACE MR0103 for wetted materials
★
Cold temperature
This option is only available for pressure type D and G, pressure ranges 1–5 with 4-20 mA HART® protocol, and silicone sensor fill fluid. It is available with 316SST, C-276, gold plated SST isolating diaphragms, and with transmitter flange types 2, 7, and 0 (only for HJ, HK, and HL). BR5 and BR6 are not available with the following options: DC, DF, D7, D9, P9, Q16, GE, and GM. Consult factory for available approvals.
Code
Description
BR5(1)
–58 °F (–50 °C) cold temperature operation
★
BR6(2)
–76 °F (–60 °C) cold temperature operation
★
BR5 option is only available with approval codes C6, E2, E5, EM, I2, I5, I7, IM, IP, K5, KM, and KP.
BR6 option is only available with approval codes EM, I2, I7, IM, IP, and KM.
HART revision configuration (requires HART Protocol output code A)
HART® Revision 5 is the default HART output.
Code
Description
HR5
Configured for HART Revision 5
★
HR7
Configured for HART Revision 7
★
Wireless power accessory
This option is only available with output code X.
Code
Description
HS
Hot swap power adapter for power module replacement
Hot Tags: rosemount™ 3051 in-line pressure transmitter, China rosemount™ 3051 in-line pressure transmitter manufacturers, suppliers, cost effective products, trade merchandise, reliable suppliers, supply chain management, consumer goods, bulk purchasing
