+86-535-4284215
video

80G Radar Level Transmitter

The general principle of the FM continuous wave radar level gauge is that the radar emits electromagnetic waves on the top of the tank, and the electromagnetic waves are received by the radar after being reflected by the medium.

Description

The general principle of the FM continuous wave radar level gauge is that the radar emits electromagnetic waves on the top of the tank, and the electromagnetic waves are received by the radar after being reflected by the medium.

 

Characteristic

1. Millimeter-wave radar, with a measurement accuracy of up to ±1mm, and a minimum blind area of 0.1m.

2. The smaller antenna size satisfies the measurement of more working conditions.

3. A variety of lens antennas, smaller launch angle, more concentrated energy, stronger echo signal, under the same industrial and mining conditions, compared to Other radar products have higher reliability.

4. With stronger penetrability, it can be used normally even if there is adhesion and condensation.

5. The dynamic signal range is larger, and the measurement of low dielectric constant medium is more stable.

6. A variety of measurement modes, the radar reaction time in the fast measurement mode is less than 1S.

 

Product Introduction

HYRD11S 

Measuring medium: Liquid
Measuring range: 0.1m~10m
Process connection: Thread G¾"A / ¾"NPT
Flange ≥DN25
Process temperature: -40~100℃
Process pressure: -0.1~1.6 MPa
Antenna size:21mm lens antenna
Antenna material: PTFE
Accuracy: ±5mm
Protection level: IP67
Center frequency: 80GHz
Launch angle:14°
Power source: Two-wire system/DC24V
Four-wire system/AC220V
Six-wire system/DC12-24V
Shell: Aluminum/Plastic/Stainless steel
Signal output: Two-wire system/4...20mA/HART protocol
Four-wire system/4...20mA/HART protocol
Six-wire system/4...20mA/HART protocol

product-400-716

HYRD11

Measuring medium: Liquid
Measuring range: 0.1m~30m
Process connection: Thread G½"A /1 ½"NPT
Flange ≥DN40
Process temperature: -40~80℃
Process pressure: -0.1~0.3 MPa
Antenna size:32mm lens antenna
Antenna material: PTFE
Accuracy: ±2mm
Protection level: IP67
Center frequency: 80GHz
Launch angle: 8°
Power source: Two-wire system/DC24V
Four-wire system/AC220V
Six-wire system/DC12-24V
Shell: Aluminum/Plastic/Stainless steel
Signal output: Two-wire system/4...20mA/HART protocol
Four-wire system/4...20mA/HART protocol
Six-wire system/4...20mA/HART protocol

product-400-1213

HYRD12

Measuring medium: Liquid
Measuring range: 0.1m~30m
Process connection:Flange ≥DN40
Process temperature: -40~100℃
Process pressure: -0.1~0.3 MPa
Antenna size:32mm lens antenna
Antenna material: PTFE
Accuracy: ±2mm
Protection level: IP67
Center frequency: 80GHz
Launch angle: 8°
Power source: Two-wire system/DC24V
Four-wire system/AC220V
Six-wire system/DC12-24V
Shell: Aluminum/Plastic/Stainless steel
Signal output: Two-wire system/4...20mA/HART protocol
Four-wire system/4...20mA/HART protocol
Six-wire system/4...20mA/HART Protocol

product-400-507

HYRD13

Measuring medium: Liquid
Measuring range: 0.2m~30m/0.3~150m
Process connection:Flange ≥DN80
Process temperature: -40~120℃
Process pressure: -0.1~1.0 MPa
Antenna size:76mm lens antenna
Antenna material: PTFE
Accuracy: ±2mm
Protection level: IP67
Center frequency: 80GHz
Launch angle: 3°
Power source: Two-wire system/DC24V
Four-wire system/AC220V
Six-wire system/DC12-24V
Shell: Aluminum/Plastic/Stainless steel
Signal output: Two-wire system/4...20mA/HART protocol
Four-wire system/4...20mA/HART protocol

Six-wire system/4...20mA/HART Protocol

product-400-414

HYRD14

Measuring medium: Liquid
Measuring range: 0.1m~30m
Process connection:Flange ≥DN50
Process temperature: -40~200℃
Process pressure: -0.1~2.5 MPa
Antenna size:44mm lens antenna
Antenna material: PTFE
Accuracy: ±2mm
Protection level: IP67
Center frequency: 80GHz
Launch angle: 6°
Power source: Two-wire system/DC24V
Four-wire system/AC220V
Six-wire system/DC12-24V
Shell: Aluminum/Plastic/Stainless steel
Signal output: Two-wire system/4...20mA/HART protocol
Four-wire system/4...20mA/HART protocol
Six-wire system/4...20mA/HART protocol

product-400-517

HYRD15

Measuring medium: Liquid
Measuring range: 0.3m~30m
Process connection:Flange ≥DN80
Process temperature: -40~200℃
Process pressure: -0.1~2.5 MPa
Antenna size:76mm lens antenna
Antenna material: PTFE
Accuracy: ±2mm
Protection level: IP67
Center frequency: 80GHz
Launch angle: 3°
Power source: Two-wire system/DC24V
Four-wire system/AC220V
Six-wire system/DC12-24V
Shell: Aluminum/Plastic/Stainless steel
Signal output: Two-wire system/4...20mA/HART protocol
Four-wire system/4...20mA/HART protocol
Six-wire system/4...20mA/HART Protocol

product-3456-5184

HYRD21

Measuring medium: Solid
Measuring range: 0.1m~30m/0.3~150m
Process connection:Flange ≥DN80
Process temperature: -40~80℃/-40~120℃
Process pressure: -0.1~0.3 MPa
Antenna size:76mm lens antenna
Antenna material: PTFE
Accuracy: ±5mm
Protection level: IP67
Center frequency: 80GHz
Launch angle: 3°
Power source: Two-wire system/DC24V
Four-wire system/AC220V
Six-wire system/DC12-24V
Shell: Aluminum/Plastic/Stainless steel
Signal output: Two-wire system/4...20mA/HART protocol
Four-wire system/4...20mA/HART protocol
Six-wire system/4...20mA/HART protocol

product-400-903

 

HYRD Installation requirements:

 

Installation method

1.Threaded installation (applicable to HYRD11s, HBRD-HYRD11)

product-164-265

2.Flange installation

When using flange mounting, the minimum distance between the meter and the tank wall should be 200mm.

Note: ①Datum

②Container center or axis of symmetry

product-437-278

3.Lifting (selected according to specific installation conditions)

product-465-352

 

Elecitical Connecions

Power Supply

(4~20) mA(2-wire): The power supply and the output current signal share a two-core shielded cable. See technical data for specific power supply voltage range.

(4~20) mA(4/6-wire) : The power supply needs to be supplied separately, and the power supply and the current signal use a four-core shielded cable (the current signal and the RS485 interface can be output at the same time, and the output needs to use a six-core shielded cable).

Modbus-RS485: The power supply needs to be supplied separately, and the power supply and the digital use a four-core shielded cable (the current signal and the RS485 interface can be output at the same time, and the output needs to use a six-core shielded cable).

 

Connection mode:

24V two-wire system wiring diagram is as follows:

product-500-326

Two-wire and two-chamber wiring diagram shown on the side is as follows:

product-500-326

Four-wire, two-room wiring diagram:

product-500-326

Six-wire wiring diagram of the four-wire system is as follows:

product-500-326

 

Structure Size:

The outer casing size (unit: mm)

The outer shell:

product-1956-1843

Stainless steel case:

product-1297-1264

 

Product Size (unit: mm)

HYRD11s

product-1000-576

HYRD11

product-1253-800

product-1000-521

This date varies with flange size

 

HYRD12

product-1000-507

HYRD13

product-1586-872

HYRD14

product-1000-491

HYRD15

product-1000-488

HYRD21

product-1000-501

 

HYRD Technical Parameters:

product-669-826

 

HYRD Meter Linearity:

Beam angle

The beam angle is the beam angle when the radar wave energy density reaches half of its maximum value (3dB width). Microwaves emit signals outside the beam range and can be reflected by interference objects.

product-1000-472

Lens antenna diameter

Φ21mm

Lens antenna

Φ32mm

Lens antenna

Φ44mm

Lens antenna

Φ78mm

Lens antenna

Beam angle

14°

The larger the antenna size, the smaller the beam Angle alpha, the less the interference echo will be generated.

For more accurate measurements, avoid installing any internal devices (such as limit switches, temperature sensors, bases, vacuum rings, heating coils, baffles, etc.) within the signal beam range.

 

HYRD Product Model Selection:

HYRD11S

License

P Standard (Non-explosion-proof)

I Intrinsically safe(Exia IIC T6 Ga)

D Intrinsically safe+Flameproof(Exd ia IIC T6 Gb)

Process Connection / Material

1 G¾Athread / ¾NPT

Flange option / material

Specification / Code / Material

PP

PTFE

Stainless steel304

Stainless steel316L

 

DN25

P1

F2

G1

S1

 

DN40

P2

F2

G2

S2

 

DN50

P3

F3

G3

S3

 

DN65

P4

F4

G4

S4

 

Antenna Type / Material

A 21mm filled lens antenna /PTFE

B 21mm filled lens antenna /PEK

Sealing / process temperature

A FKM/(-40-100℃)

B PEK/(-40-150℃)

The Electronic Unit

1 (4~20)mA/HART protocol 24VDC 2-wire

2 (4~20)mA/HART protocol 220VAC 4-wire

3 (4~20)mA+RS485/Modbus protocol 12- 24VDC 6-wire

Shell material/protection grade

A Cast aluminum / Single chamber / IP67

B Cast aluminum / Double chamber / IP67

C Cast aluminum / Double cavity side view / IP67

D Plastic ABS / Single chamber / IP65

E Stainless steel 304 / Single chamber / IP67

Cable Line

M M20×l. 5

N ½″ NPT

X Special customization

Display programming

A Programming with display

B With display programming / Bluetooth communication

C Without

License

P Standard (Non-explosion-proof)

I Intrinsically safe(Exia IIC T6 Ga)

D Intrinsically safe+Flameproof(Exd ia IIC T6 Gb)

Process Connection / Material

1 G1½A thread

2 Flange≥DN40(Stainless steel+PTFE)

X Special customization

Flange option / material

Specification / Code / Material

PP

PTFE

Stainless steel304+PTFE

Stainless steel316L+PTFE

DN40

-

-

G1

S1

DN50

P2

F2

G2

S2

DN65

P3

F3

G3

S3

DN80

P4

F4

G4

S4

DN100

P5

F5

G5

S5

DN125

P6

F6

G6

S6

DN150

P7

F7

G7

S7

Antenna Type / Material

A 32mm filled lens antenna /PTFE

Sealing / process temperature

A FKM/(-40-80℃)

B FKM/(-40-100℃)

The Electronic Unit

1 (4~20)mA/HART protocol 24VDC 2-wire

2 (4~20)mA/HART protocol 220VAC 4-wire

3 (4~20)mA+RS485/Modbus protocol 12- 24VDC 6-wire

Shell material/protection grade

A Cast aluminum / Single chamber / IP67

B Cast aluminum / Double chamber / IP67

C Cast aluminum / Double cavity side view / IP67

D Plastic ABS / Single chamber / IP65

E Stainless steel 304 / Single chamber / IP67

Cable Line

M M20×l. 5

N ½″ NPT

X Special customization

Display programming

A Programming with display

B With display programming / Bluetooth communication

C Without

 

HYRD12

License

P Standard (Non-explosion-proof)

I Intrinsically safe(Exia IIC T6 Ga)

D Intrinsically safe+Flameproof(Exd ia IIC T6 Gb)

Process Connection / Material

1 G1½A thread/304

2 Flange≥DN40 (Stainless steel + PTFE)

X Special customization

Flange option / material

Specification / Code / Material

PP

PTFE

Stainless steel304+PTFE

Stainless steel316L+PTFE

DN40

-

-

G1

S1

DN50

P2

F2

G2

S2

DN65

P3

F3

G3

S3

DN80

P4

F4

G4

S4

DN100

P5

F5

G5

S5

DN125

P6

F6

G6

S6

DN150

P7

F7

G7

S7

Antenna Type / Material

A 32mm filled lens antenna /PTFE

Sealing / process temperature

A FKM/(-40-100℃)

The Electronic Unit

1 (4~20)mA/HART protocol 24VDC 2-wire

2 (4~20)mA/HART protocol 220VAC 4-wire

3 (4~20)mA+RS485/Modbus protocol 12- 24VDC 6-wire

Shell material/protection grade

A Cast aluminum / Single chamber / IP67

B Cast aluminum / Double chamber / IP67

C Cast aluminum / Double cavity side view / IP67

D Plastic ABS / Single chamber / IP65

E Stainless steel 304 / Single chamber / IP67

Cable Line

M M20×l. 5

N ½″ NPT

X Special customization

Display programming

A Programming with display

B With display programming / Bluetooth communication

C Without

License

P Standard (Non-explosion-proof)

I Intrinsically safe(Exia IIC T6 Ga)

D Intrinsically safe+Flameproof(Exd ia IIC T6 Gb)

Process Connection / Material

1 G3.5A Thread

2 Flange≥DN80 (Stainless steel + PTFE)

X Special customization

Flange option / material

Specification / Code / Material

PP

PTFE

Stainless steel304+PTFE

Stainless steel316L+PTFE

DN80

P4

F4

G4

S4

DN100

P5

F5

G5

S5

DN125

P6

F6

G6

S6

DN150

P7

F7

G7

S7

Antenna Type / Material

A 76mm filled lens antenna /PTFE

Sealing / process temperature

A FKM/(-40-110℃)

B EPDM/(-40-110℃)

Y Special customization

The Electronic Unit

1 (4~20)mA/HART protocol 24VDC 2-wire

2 (4~20)mA/HART protocol 220VAC 4-wire

3 (4~20)mA+RS485/Modbus protocol 12- 24VDC 6-wire

Shell material/protection grade

A Cast aluminum / Single chamber / IP67

B Cast aluminum / Double chamber / IP67

C Cast aluminum / Double cavity side view / IP67

D Plastic ABS / Single chamber / IP65

E Stainless steel 304 / Single chamber / IP67

Cable Line

M M20×l. 5

N ½″ NPT

X Special customization

Display programming

A Programming with display

B With display programming / Bluetooth communication

C Without

License

P Standard (Non-explosion-proof)

I Intrinsically safe(Exia IIC T6 Ga)

D Intrinsically safe+Flameproof(Exd ia IIC T6 Gb)

Process Connection / Material

1 Flange≥DN50 (Stainless steel + PTFE)

X Special customization

Flange option / material

Specification / Code / Material

PP

PTFE

Stainless steel304+PTFE

Stainless steel316L+PTFE

DN50

-

-

G2

S2

DN65

-

-

G3

S3

DN80

-

-

G4

S4

DN100

-

-

G5

S5

DN125

-

-

G6

S6

DN150

-

-

G7

S7

Antenna Type / Material

A 44mm filled lens antenna/PTFE

Sealing / process temperature

B FKM/(-40-200℃)

The Electronic Unit

1 (4~20)mA/HART protocol 24VDC 2-wire

2 (4~20)mA/HART protocol 220VAC 4-wire

3 (4~20)mA+RS485/Modbus protocol 12- 24VDC 6-wire

Shell material/protection grade

A Cast aluminum / Single chamber / IP67

B Cast aluminum / Double chamber / IP67

C Cast aluminum / Double cavity side view / IP67

D Plastic ABS / Single chamber / IP65

E Stainless steel 304 / Single chamber / IP67

Cable Line

M M20×l. 5

N ½″ NPT

X Special customization

Display programming

A Programming with display

B With display programming / Bluetooth communication

C Without

 

HYRD15

License

P Standard (Non-explosion-proof)

I Intrinsically safe(Exia IIC T6 Ga)

D Intrinsically safe+Flameproof(Exd ia IIC T6 Gb)

Process Connection / Material

1 G3.5A Thread

2 Flange≥DN80 (Stainless steel + PTFE)

X Special customization

Flange option / material

Specification / Code / Material

PP

PTFE

Stainless steel304+PTFE

Stainless steel316L+PTFE

DN80

-

-

G4

S4

DN100

-

-

G5

S5

DN125

-

-

G6

S6

DN150

-

-

G7

S7

Antenna Type / Material

A 76mm filled lens antenna/PTFE

Sealing / process temperature

B EPDM/(-40-200℃)

Y Special customization

The Electronic Unit

1 (4~20)mA/HART protocol 24VDC 2-wire

2 (4~20)mA/HART protocol 220VAC 4-wire

3 (4~20)mA+RS485/Modbus protocol 12- 24VDC 6-wire

Shell material/protection grade

A Cast aluminum / Single chamber / IP67

B Cast aluminum / Double chamber / IP67

C Cast aluminum / Double cavity side view / IP67

D Plastic ABS / Single chamber / IP65

E Stainless steel 304 / Single chamber / IP67

Cable Line

M M20×l. 5

N ½″ NPT

X Special customization

Display programming

A Programming with display

B With display programming / Bluetooth communication

C Without

 

HYRD21

License

P Standard (Non-explosion-proof)

I Intrinsically safe(Exia IIC T6 Ga)

D Intrinsically safe+Flameproof(Exd ia IIC T6 Gb)

Process Connection / Material

1 G3.5A Thread

2 Flange≥DN80

X Special customization

Flange option / material

Specification / Code / Material

PP

PTFE

Stainless steel304+PTFE

Stainless steel316L+PTFE

DN80

P4

F4

G4

S4

DN100

P5

F5

G5

S5

DN125

P6

F6

G6

S6

DN150

P7

F7

G7

S7

DN200

P8

F8

G8

S8

Antenna Type / Material

A 76mm Lens antenna / With purge port / PE

B 76mm Lens antenna / With purge port / PTFE

Sealing / process temperature

A FKM/(-40-80℃)

B FKM/(-40-110℃)

C FKM/(-40-200℃)

Y Special customization

he Electronic Unit

1 (4~20)mA/HART protocol 24VDC 2-wire

2 (4~20)mA/HART protocol 220VAC 4-wire

3 (4~20)mA+RS485/Modbus protocol 12- 24VDC 6-wire

Shell material/protection grade

A Cast aluminum / Single chamber / IP67

B Cast aluminum / Double chamber / IP67

C Cast aluminum / Double cavity side view / IP67

D Plastic ABS / Single chamber / IP65

E Stainless steel 304 / Single chamber / IP67

Cable Line

M M20×l. 5

N ½″ NPT

X Special customization

Display programming

A Programming with display

B With display programming / Bluetooth communication

C Without

Hot Tags: 80g radar level transmitter, China 80g radar level transmitter manufacturers, suppliers, 80G Radar Level Transmitter, Radar Level Transmitter, Level Meter, 26G Radar Level Transmitter

Contact Supplier